TM 5-4610-228-13
TM 08846A-13/1
f. Connect two remaining hoses (23) to Y connection (31) installed in step above. Position hoses.
g. Connect remaining Y connection (31) to the left-hand hose assy.
h. Connect one of the three gate valve assys (22) to the right-hand hose assy (23).
i. Connect each of the two remaining gate valve assys (22) to the two unconnected ends of the second Y
connection (31) to be installed.
j. Connect each of the three hose assys (23) to each of the three gate valve assys (22) installed in steps (h) and
(i), above.
k. Connect male ends of hoses (23) to bag filler connection kits.
If an unpleasant taste or odor is present, rinse the hoses with a solution of 100
parts per million calcium hypochlorite and water prior to initial use. (See TM
5-700, Section III, Paragraph 48.)
NOTE
Do not remove the cap from the tee assy.
2-49