TM 5-5430-211-13 & P
4-6 TESTING THE TANK FOR LEAKS - CONTINUED
Lay out the tank.
If outdoors the site must be sheltered from the wind.
Make sure the vent, discharge and filler assembly dust caps are in position.
Setting up Equipment
Place the blower fan near the drain end of the tank.
Remove the discharge assembly dust cap.
Connect the 4 5/8 inch I.D. tubing to the blower fan outlet and to the assembly.
Clamp the tubing in place using hose clamps.
Attach the pressure gauge and drain hose to the drain valve.
Screw the drain hose and valve into the drain assembly and open the valve.