TM 10-4130-237-14
5-19. FILTER-DRIER REPLACEMENT (CONT)
a. R e m o v al
1 Set water chiller on its side.
2
Remove 16 bottom plate mounting screws. Remove bottom plate.
3
Remove clamp mounting bolt and lockwasher.
4
Remove filter-drier fittings. Remove filter-drier.
5 Slide clamp off filter-drier.
b. Installation
1 Slide new filter-drier into clamp.
2
Install clamp mounting bole
3 Install filter-drier. Connect filter-drier fittings.
4
Install bottom plate. Install 16 bottom plate mounting screws.
5 Set water chiller back on skid base.
5-65