Pressure-Reducing Valve Assembly Maintenance - cont

Pressure-Reducing Valve Assembly Maintenance - TM-10-4320-303-13_185

Pressure-Reducing Valve Assembly Maintenance - cont - TM-10-4320-303-13_187

TM-10-4320-303-13 Tactical Water Distribution Equipment System (TDWS) Set 10-Mile Segement Model 06749-0813-81 110-00-0000 919 and 10 Manual
Page Navigation
174

TM 10-4320-303-13 b. Remove two nuts (4), lock washers (5), and mounting bolts (6) securing each mounting bracket (3) to skid assembly (7). Discard lock washers (5). c. Remove mounting brackets (3). WARNING Two personnel are required for lifting main valve assembly. Failure to obey this warning may result in personnel injury. CAUTION When removing main valve assembly ensure that tubing does not become damaged. d. Carefully remove main valve assembly (2) from skid assembly (7). 4.11.5.2 Disassembly. Figure 4-11. Pressure-Reducing Valve Assembly Tubing and Pressure-Reducing Control Maintenance. a. Open cover isolation cock valves (Figure 4-11, 1) to release pressure inside main valve assembly (2). b. Remove tubing (3). c. Remove reducer (4) from isolation cock valve (5). 4-29

Privacy Statement
Press Release
Contact