TM 10 4320-303-13
4.16.1 Hose Retaining Bracket Maintenance.
This task covers:
4.16.1.1 Disassembly
4.16.1.3 Repair
4.16.1.2 Inspection
4.16.1.4 Assembly
INITIAL SETUP
Tools
General Safety Instructions
Tool Kit, General Mechanic's,
Do not work on equipment without following
Automotive, Section III, Item 1,
standard shop safety precautions.
Appendix B
Equipment Conditions
Hose Retaining Bracket removed from
packing kit.
4.16.1.1 Disassembly.
Figure 4-27. Hose Retaining Bracket Maintenance.
NOTE
This procedure is applicable to both the right and left hose retaining bracket.
a. Remove nut (Figure 4-27, 1) and flat washer (2).
b. Remove bolt (3), flat washer (4), and nut (5).
4.16.1.2 Inspection.
a. Inspect hose retaining bracket (6) for separation of welds, cracks, damaged or missing toggle. Notify
direct support maintenance if hose retaining bracket (6) is damaged.
b. Inspect nuts (1 and 5), flat washers (2 and 4), and bolt (3) for damage.
4-65
