TM 10-4320-345-13
2-11. ASSEMBLY AND PREPARATION FOR USE - cont.
1.
Assemble Storage Assembly Refer to figure 2-28.
NOTES
One 6-inch coupling clamp is supplied with the storage assembly, the
other clamp is part of the hoseline.
Refer to para 2-11e to install and remove coupling clamps.
(1) Prepare and assemble 20K collapsible tank (14) for use Refer to applicable TM.
(2) Locate hoseline coupling clamp nearest to storage assembly installation site. Remove
coupling clamp (4) and open hoseline at two 6-inch x 500 feet discharge hoses (3 and 5)
(3) Connect reducer tee (1) to 6-inch x 500 feet discharge hose (3) with coupling clamp (2).
(4) Connect 6-inch x 500 feet discharge hose (5) to reducer tee (1) with coupling clamp (4).
(5) Connect adapter (7) to reducer tee (1) with 4-inch coupling clamp (6).
NOTE
Refer to para 2-1 1d to connect quick disconnect couplings.
(6) Connect 4-inch gate valve (8) to adapter (7).
(7) Connect water meter (9) to 4-inch gate valve (8).
(8) Connect four 4-inch x 10 feet suction hoses (10, 11, 12 and 13) to water meter (9).
(9) Connect 4-inch x 10 feet suction hose (13) to female elbow (14) (inlet) on 20K collapsible
tank (15).
2-58
