TM 10-4320-346-12&P
1-10.
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. The FAWPSS consists of the following major
components shown on Figure 1-2.
a. Pump and Engine Assembly. A diesel powered pump and engine assembly (1) capable of pumping 125
gallons of potable water per minute is provided with the FAWPS S to pump the potable water stored in the 500 gallon
water drums to the water distribution nozzles.
b. Collapsible Water Drums. Six collapsible water drums (2) with coupler valve assemblies (3) are furnished to
store water within the FAWPSS until it is needed at the distribution points.
c. Towing Yokes. One towing and lifting yoke (4) is provided to allow the collapsible drums to be moved.
d. Nozzle Assemblies. Four nozzle assemblies (5) are provided to distribute the potable water at four distribution
points.
e. Nozzle Stand Assemblies. Two nozzles stand assemblies (6) are furnished to provide a device to store the
water distribution nozzles in a safe manner when the nozzles are not being used.
f. Swivel Assemblies. Four swivel assemblies (7) are attached to each of the four nozzle assemblies to allow
freedom of nozzle movement without damage or kinking of the FAWPSS hose assemblies.
g. Valve Assemblies. To allow for flexibility in choosing which collapsible drum assembly will be used for
distribution of water, two 2.00 in. ball valve assemblies (8) are provided with the FAWPSS.
h. Hose Assemblies. For distribution and routing of the potable water throughout the FAWPSS, four 2.00 in. x 10
feet long hose assemblies (9), two 2.00 in. x 25 feet long hose assemblies (10), and four 1.50 in. x 25 feet long hose
assemblies (11) are provided.
i.
Fuel Can. Two five gallon fuel cans (12) are provided for refueling the FAWPSS pump and engine assembly.
j.
Deleted.
Change 1 1-3
