TM 10-4610-237-12
APPENDIX G
LIST OF MANUFACTURED ITEMS
Section I. INTRODUCTION
G.1
SCOPE. This appendix includes complete instructions for making items authorized to be manufactured or
fabricated at unit maintenance. A part number index in alphanumeric order is provided for cross-referencing the part
number of the item to be manufactured to the figure which covers fabrication criteria. All bulk materials needed for
manufacture of an item are listed by part number or specification number in a tabular list on the illustration.
G.2
MANUFACTURED ITEM PART NUMBER INDEX.
Part No. RR-C-271A, Sash Chain (All quick disconnect cap and plug attaching chains.) ...................................... Figure 1
Part No. RR-C-271A, Sash Chain (All stand assemblies clevis and pivot leg attaching chains.) ........................... Figure 2
G.3
MANUFACTURFID ITEM ILLUSTRATIONS. See Figures 1 and 2.
Section II. MANUFACTURED ITEMS
PROCEDURE: Cut sash chain to 19 links or 45 links per Figure 1 or 2, as applicable.
MATERIALS
DESCRIPTION
NSN
SASH CHAIN, RR-C-27 1-A, TYPE II,
CLASS 3, LINK SIZE 35, BRONZE
4010-00228-9933
Figure 2. Attaching Chains, Stand Assemblies Clevis and Pivot Leg
Figure 1. Attaching Chains, Quick Disconnect Cap and Plug.
G-1/(G-2 Blank)
