Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

DISTRIBUTION NOZZLE (1 1/2-INCH) - TM-10-4610-237-12_20

TM-10-4610-237-12 20K Gallon Water Storage and Distribution System Model 20KWSDS (NSN: 4320-01-382-2684) (EIC:ZIN) Manual
Page Navigation
13

TM 10-4610-237-12 Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) 2.3 GENERAL. Preventive Maintenance Checks and Services (PMCS) means systematic caring, inspecting, and servicing of equipment to keep it in good condition and to prevent breakdowns. As the operator of the 20K Water Storage and Distribution System, your mission is to: a. Be sure to perform your PMCS each time you operate the 20K Water Storage and Distribution System. Always do your PMCS in the same order, so it gets to be a habit. Once you've had some practice, you'll quickly spot anything wrong. b. Do your BEFORE (B) PMCS just before you operate the equipment. Pay attention to WARNINGs, CAUTIONs and NOTEs. c. Do your DURING (D) PMCS while you operate the equipment. During operation means to monitor the equipment and its related components while it is actually being operated. Pay attention to WARNINGs, CAUTIONs and NOTEs. d. Do your AFIER (A) PMCS right after operating your equipment. Pay attention to WARNINGs, CAUTlONs and NOTEs. e. Use DA Form 2404 (Equipment Inspection and Maintenance Worksheet) to record any faults that you discover before, during, or after operation, unless you can fix them. You DO NOT need to record faults that you fix. f. Be prepared to assist unit maintenance when required. g. When a check and service procedure is required for both WEEKLY and BEFORE intervals, it is not necessary to do the procedure twice if the equipment is operated during the weekly period. 2.4 PMCS PROCEDURES. a. Your Preventive Maintenance Checks and Services, Table 21, lists inspections and care required to keep your equipment in good operating condition. It is setup so you can make BEFORE (B) OPERATION checks as you walk around the equipment. b. The "INTERVAL" column of Table 2-1 tells you when to do a certain check or service. c. The "LOCATION, ITEM TO CHECKISERVICE" column of Table 2-1 tells you the name of the item to be checked or serviced and where the item is located. d. The "PROCEDURE" column of Table 2-1 tells you how to do required checks and services. Carefully follow these instructions. If you do not have tools, or if the procedure instructs you to, notify your supervisor. 2-4

Privacy Statement
Press Release
Contact