DISTRIBUTION NOZZLE ASSEMBLY (1 1/2-INCH) REPAIR

Section V. UNIT MAINTENANCE PROCEDURES - TM-10-4610-237-12_96

DISTRIBUTION NOZZLE ASSEMBLY (1 1/2-INCH) REPAIR - cont - TM-10-4610-237-12_98

TM-10-4610-237-12 20K Gallon Water Storage and Distribution System Model 20KWSDS (NSN: 4320-01-382-2684) (EIC:ZIN) Manual
Page Navigation
89

TM 10-4610-237-12 4.14 DISTRIBUTION NOZZLE ASSEMBLY (1 1/2-INCH) REPAIR. This task consists of: a. Disassembly b. Cleaning c. Inspection d. Repair e. Assembly INITIAL SET-UP: Tools: Material/Parts: General Mechanics Tool Kit (Item 1, App. B) Detergent, General Purpose (Item 1, App. E) Pipe Wrench (Item 2, App. B) Wiping Rag (Item 2, App. E} Equipment Condition: Tape, Anti-seize (Item 3, App. E) Distribution nozzle removed (para. 3.4a) Gasket (Item 1, App. I) Packing (Item 4, App. I) Disc (Item 5, App. I) Disc (Item 6, App. I) NOTE Ensure that all parts identified as mandatory replacement parts are discarded and replaced with new components. a. Disassembly. Refer to Figure 42. (1) Disconnect S-hook (1) from body (26). (2) Remove S-hook (1) from chain and spring (2). (3) Remove tube cap (4) and S-hook (3) from chain and spring (2). Disconnect S-hook from tube cap. (4) Remove gasket (5) from female coupling (6). (5) Remove swivel (7) and female coupling (6) from body (26). (6) Unscrew female coupling (6) from swivel (7). (7) Drive out groove pin (8) and remove handle (9) from body (26). 4-18

Privacy Statement
Press Release
Contact