TM 10-4610-242-13
4-16. TEE ASSEMBLY (9117-Y1) REPAIR.
This task covers:
a.
Disassembly
b.
Cleaning
c.
Inspection
d
Repair
e
Assembly
INITIAL SETUP:
Tools:
Wiping Rag (Item 2, App E)
General Mechanics Tool Kit ([tem 1, App B)
Tape, Anti-seize (Item 3, Appendix E)
Equipment Condition:
Gasket (2) (Item 4, App I)
Tee assembly removed (para 3-4a)
Gasket (3) (Item 10; App I)
Material/Parts:
Lockwasher (24) (Item 11, App I)
Detergent, General Purpose (Item 1, App E)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and replaced with
new components.
a.
Disassembly. Refer to figure 4-6
(1)
Disconnect E ing (1) from female coupling (9) and remove plug (2).
(2)
Remove gasket (3) from female coupling (9).
(3)
Remove eight nuts (4), lockwashers (5), flat washers (6 and 8), and bolts (7).
(4)
Separate female coupling (9) and gasket (10) from tee (28).
(5)
Remove eight nuts (11), lockwashers (12), flat washers (13 and 15), and bolts (14).
(6)
Separate male coupling (16) and gasket (17) from tee (28).
(7)
Disconnect ring (18) from male coupling (26) and remove cap (20).
(8)
Remove gasket (19) from cap (20).
(9)
Remove eight nuts (21), lockwashers (22), flat washers (23 and 25), and bolts (24).
(10)
Separate male coupling (26) and gasket (27) from tee (28).
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
4-36
