TM 10-4610-242-13
4-28. TEE ASSEMBLY (9112-Y2) REPAIR.
This task consists of:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INITIAL SET-UP:
Tools:
Wiping Rag (Item 2, App E)
General Mechanics Tool Kit (Item 1, App B)
Tape, Anti-seize (Item 3, Appendix E)
Equipment Condition:
Gasket (2) (Item 4, App I)
Tee assembly removed (para 3-4a)
Gasket (3) (item 10, App I)
Material/Parts:
Lockwasher (24) (Item 11, App I)
Detergent, General Purpose (Item 1, App E)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and replaced with new
components.
a.
Disassembly. Refer to figure 4-21.
(1)
Remove gasket (1) from female coupling (7).
(2)
Remove eight nuts (2), lockwashers (3), flat washers (4) and screws (5) and flat washers (6).
(3)
Separate female coupling (7) and gasket (8) from tee (26).
(4)
Disconnect ring (9) from male coupling (17) and remove cap (11).
(5)
Remove gasket (10) from cap (11).
(6)
Remove eight nuts (12), lockwashers (13), flat washers (14), screws (15) and flat washers (16).
(7)
Separate male coupling (17) and gasket (18) from tee (26).
(8)
Remove eight nuts (19), lockwashers (20), flat washers (21), screws (22) and flat washers (23).
(9)
Separate male coupling (24) and gasket (25) from tee (26).
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
c.
Inspection.
(1)
Inspect male couplings (17 and 24) for cracks.
4-72
