TM 10-4610-242-13
4-42. TEE ASSEMBLY (9115-Y1) REPAIR.
This task covers:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INITIAL SETUP:
Tools:
Wiping Rag (Item 2, App E)
General Mechanics Tool Kit (Item 1, App B)
Tape, Anti-seize (Item 3, Appendix E)
Equipment Condition:
Gasket (2) (Item 4, App I)
Tee assembly removed (para 3-4a)
Gasket (3) (Item 10, App 1)
Material/Parts:
Lockwasher (24) (Item 11, App I)
Detergent, General Purpose (Item 1, App E)
a.
Disassembly. Refer to figure 4-40.
(1)
Disconnect ring (1) from male coupling (9) and remove cap (3).
(2)
Remove gasket (2) from cap (3).
(3)
Remove eight nuts (4), lockwashers (5), flat washers (6) and screws (7) and flat washers (8).
(4)
Separate male coupling (9) and gasket (10) from tee (28).
(5)
Remove eight nuts (I1), lockwashers (12), flat washers (13), screws (14) and flatwashers (15).
(6)
Separate male coupling (16) and gasket (17) from tee (28).
(8)
Disconnect ring (18) from female coupling (26) and remove plug (19).
(9)
Remove gasket (20) from female coupling (26).
(10)
Remove eight nuts (21), lockwashers (22), flat washers (23) and screws (24) and flat washers (25).
(11)
Separate female coupling (26) and gasket (27) from tee (28).
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
4-116
