TM 10-4610-242-13
4-43. WATER TANK CHEST REPAIR cont.
Skid Repair Refer to figure 4-46.
(1)
Hoisting ring replacement.
(a)
Unscrew hoisting ring (1) from skid (10).
(b)
Screw replacement hoisting ring (1) into skid (10).
(2)
Locking pin replacement.
(a)
Remove three nuts (2), lockwashers (3), flat washer (4), screw (5) and flat washer (6) from skid (10).
(b)
Separate outer latch bracket (7) and inner latch bracket (9) from skid (10).
(c)
Remove locking pin (8) from inner latch bracket (7).
(d)
Position replacement locking pin (8) in inner latch bracket (7).
(e)
Position inner latch bracket (7) and outer latch bracket (9) on skid (10).
(f)
Install three flat washers (6), screws (5), flat washers (4), lockwashers (3) and nuts (2).
(3)
Replace skid if damaged beyond repair.
d.
Assembly. Refer to figure 4-42.
(1)
Position side panel (7) on skid (10). Lock four locking pins (6).
(2)
Repeat step (1) for other side panel (8).
(3)
Position end panel (4 and 5) between side panel (7 and 8). Turn four handles (3) to CLOSE position on
both end panels.
(4)
Position divider pan (9) on skid (10).
(5)
Lower top cover (2) onto water chest. Fasten eight latches (1).
4-128