TM5-3820-256-10
NOTES (Continued):
5.
A sample of the oil from the rotary table shall be sent to an AOAP laboratory for analysis at 1500-hour or 9-
month intervals. Refer to TB 43-0210 for sampling requirements.
6.
When AOAP laboratory support is not available, drain and refill the rotary table at 3000 hours or 18 months.
7.
Remove the fill/level check plug to check lubricant level in the rotary table. Lubricant should be even with the
bottom of the fill/level check plug hole. If needed, add oil through this opening. Reinstall the fill-level check plug.
Figure 3-10. Lubrication Instructions for Rotary Table Drive System (Sheet 3 of 3)
3-23
