TM5-3820-256-10
3-11.
Force Feed Lubricator. Troubleshooting procedures for the force feed lubricator are listed in table 3-7.
a. The table lists the common malfunctions that you may find during the operation or maintenance of the force feed
lubricator. You should perform the tests/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all tests/inspections and corrective actions. If a
malfunction is not listed or is not corrected by listed corrective action, notify your supervisor.
Table 3-7.
Troubleshooting the Force Feed Lubricator
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
FORCE FEED LUBRI-
Step 1. Check to see if
Move oiler switch to ON
CATOR DOES NOT
oiler switch is on.
position.
DELIVER OIL.
Step 2. Check oil level
Add oil as needed.
in force feed lubricator
reservoir.
3-12.
Break-out Assembly. Troubleshooting procedures for the break-out assembly are listed in table 3-8.
a. The table lists the common malfunctions that you may find during the operation or maintenance of the break-out
assembly. You should perform the tests/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all tests/inspections and corrective actions. If a
malfunction is not listed or is not corrected by listed corrective action, notify your supervisor.
Table 3-8. Troubleshooting the Break-Out Assembly
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BREAK-OUT CYLIN-
Step I. Check oil level in
Add oil as needed.
DER DOES NOT EX-
hydraulic oil reservoir.
TEND OR RETRACT.
Step 2. Check to see if
Stop truck engine, open valve,
hydraulic pump suction line
and restart truck engine.
valve is open.
Step 3. Check for loose
Tighten any loose connections.
suction line connections.
3-51
