TM 5-3820-256-24P-2
(5) ITEM column. The item number is that number assigned to the item as it appears in the
figure referenced in adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column. This column lists the number of the figure where the item is identified/located
in Section II and III.
(2) ITEM column. The item number is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
(3) STOCK NUMBER column. This column lists the NSN for the item.
(4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit
numeric code used to identify the manufacturer, distributor, or Government agency, etc., that
supplies the item.
(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls the design and characteristics of
the item by means of its engineering drawings, specifications standards, and inspection
requirements to identify an item or range of items.
5. SPECIAL INFORMATION.
a. USABLE ON CODE. The usable on code appears in the lower corner of the Description column
heading. Usable on codes are shown as "UOC:.." in the Description Column justified left) on the last line
applicable item description/nomenclature. Uncoded items are applicable to all models.
b. ASSOCIATED PUBLICATIONS. The publications listed below pertains to the 600-Foot Well Drilling
System and its components.
Publication
Short Title
TM 5-3820-256-24P-1
Drilling Machine
TM 5-3820-256-24P-2
Drilling Machine Truck
TM 5-3820-256-24P-3
Drilling Rig Tender
TM 5-3820-256-24P-4
Drilling Rig Tender Truck
TM 5-3820-256-10
Operation, Preventive Maintenance and Lubrication of the Well
Drilling System
TM 5-3820-256-24-1
Drilling Machine
TM 5-3820-256-24-2
Support Vehicle
TM 5-3820-256-24-3
Drilling System Trucks
TM 5-3820-256-24-4
Drilling System Trucks
TM 5-3820-256-24-5
Drilling System Trucks
TM 5-3820-256-24-6
Well Completion Kit
NOTE
Associated publications shall not be listed here in combined narrative and
RPSTL listings
c. ILLUSTRATIONS - LISTING. The illustrations in this RPSTL are identical to those published in
TM___________________. (higher level P manuals) Only those parts codes "C" or "O" in the third
position of the SMR Code are listed in the tabular listing; therefore, there may be a break in the item
number sequence. Only illustrations containing Unit or Aviation unit authorized items appear in this
RPSTL.
NOTE
The above statements shall appear in UNIT or aviation unit level RPSTL's only.
6
