TM 5-3825-225-14&P
CHAPTER 4
UNIT MAINTENANCE
Section I. SERVICE UPON RECEIPT
4-1.
INSPECTION.
a.
Make a complete visual inspection to see that basic issue items, publications, accessories, and attachments
are with the water distributor.
b.
Visually inspect entire water distributor and record any damage or loss of parts.
c.
Check tire pressure. It should be 75 psi (517 kPa).
d.
Inspect engine cowling, exhaust muffler, air cleaner, and air restriction indicator.
e.
Remove engine cowling (5, Appendix F, Figure 47) and side panel (16), and check the injector pump, fuel
filters, alternator and belt, oil filter, and throttle control valve for damage (see Figure 4-1).
f.
Open instrument panel and inspect gages and instruments for damage (see Figure 2-1).
g.
Inspect auxiliary control box for damage and mount it in tractor cab (see Figure 2-2).
h.
Ensure that all hose connections and electrical connections are secure. Replace any chafed, frayed, or
damaged hoses, wires or fittings (see Figures 4-2 through 4-4).
i.
Check crankcase oil level and add oil as necessary (see Chapter 3, Section I).
Figure 4-1. Water Distributor Engine.
4-1