TM 5-3825-225-14&P
4-18.
CLEARANCE LIGHTS MAINTENANCE.
NOTE
·
Maintenance of all clearance lights is similar.
The triple clearance light Is described here.
·
A gasket Is provided for all clearance lights
except the rear clearance lights.
a.
Removal and Disassembly (See Appendix E Figure 5).
(1)
Pry lens (5) from body (3) and remove preformed packing (6) from body. Discard preformed
packing.
(2)
Disconnect wires and remove conduit from light assembly (1).
(3)
Remove lamps (4) from socket.
(4)
Remove nuts (9), lockwashers (8), screws (7), and light assembly (1). Discard lockwashers.
(5)
Separate bodies (3) from pipe nipples (2) and remove pipe plug (10).
b.
Assembly and Installation (See Appendix E Figure 5)
(1)
Insert pipe nipples (2) and pipe plug (10) into bodies (3).
(2)
Attach bodies (3) to mounting bracket with screws (7), new lockwashers (8), and nuts (9).
(3)
Thread wires through bodies (3) and nipples (2), and attach conduit to body.
(4)
Insert lamp (4) into socket and connect wires.
(5)
Ensure that lights operate correctly.
(6)
Insert new preformed packing (6) and press lens (5) into body (3).
4-19.
TAILLIGHTS AND STOP AND TURN LIGHTS MAINTENANCE.
a.
Removal and Disassembly (See Appendix E Figure 6).
NOTE
Stop, turn, and taillights are removed and disassembled the same.
(1)
Pry lens (7) from body (9) and remove preformed packing (8). Discard preformed packing.
(2)
Disconnect wire, conduit, and pipe plug (4) from body (9).
(3)
Remove lamp (6).
(4)
Remove screws (3), nuts (1), lockwashers (2), body (9), and gasket (10) from rear bumper. Discard
lockwashers and gasket.
b.
Assembly and Installation (See Appendix E Figure 6).
NOTE
Stop, turn, and taillights are assembled and installed the same.
(1)
Attach new gasket (10) and body (9) to rear bumper with screws (3), new lockwashers (2), and nuts
(1).
(2)
Thread wire from conduit into body (9) and attach conduit to body.
(3)
Install lamp (6).
(4)
Ensure that lights operate correctly.
(5)
Install new preformed packing (8) and press lens (7) into body (9).
4-20. BATTERY AND BATTERY BOX MAINTENANCE.
a.
Battery Box Disassembly (See Appendix Figure 9).
(1)
Unlatch and remove battery box cover (9).
(2)
Remove wingnut (6), washer (7), screw (11), and retainer (8).
4-18