TM 5-3825-226-24
FUEL FILTER BASE
(1)
Put 9S3263 Thread Lock Compound on the
threads of the tapered end of the stud
to a distance of .................................30 in. (7.6 mm)
(2)
Sealing surface of stud.
NOTE: Do not damage this surface.
(3)
Torque for stud .............50 ± 10 lb. ft. (70 ± 14 N-m)
(4)
Distance from sealing surface of base
to end of stud ............. .97 ± .05 in. (24.6 ± 1.3 mm)
AUTOMATIC TIMING ADVANCE UNIT
End play between washer (2) and
timing advance unit (1) ...003 to .037 in. (0 08 to 0.94 mm)
(3)
Torque for screw .......... 72 ± 5 lb. in (8.2 ± 0.6 Nom)
"Stake" (make a mark with a punch) screw (3) in two places.
DRIVE GEAR FOR THE INJECTION PUMP
(1)
Torque for the bolt that holds the
drive gear to the camshaft of the
injection pump ......... 110 ± 10 lb. ft. (149 ± 14 N-m)
1-10