TM 5-3825-226-24 WATER PUMP DISASSEMBLE WATER PUMP Tools Needed A B 5F7465 Puller Assembly 1 9N869 Washer 2 1F5842 Bolt (5/16"-18 NC x 3 1/4" long) 2 5P7356 Spacer 1 5P7354 Pin 1 start by: a) remove water pump NOTE Make    a    replacement    of    the    shaft assembly,   seal   assembly,   cup   and seat  with  new  parts  when  the  water pump is assembled. 1. Use  tooling  (A)  to  remove  pulley  (1)  from  the shaft assembly. 2. Use  tool  (B)  and  a  press  to  remove  the  shaft assembly   from   the   impeller   and   housing   as shown. WARNING:   The   press   must   have   a guard.  The guard has been removed for photo illustration. 3. Use  a  hammer  and  punch  to  remove  the  seal assembly from the housing. 4. Remove the seat and cup from the impeller. ASSEMBLE WATER PUMP Tools Needed A B C D E F 5P7346 Plate 1 5P7347 Spacer 1 5P7348 Spacer 1 5P7352 Spacer 1 5P7353 Spacer 1 5P7355 Plate 1 1. Use    a    press    and    tool    (B)    to    install    shaft assembly (1) in the housing as shown. 2. Use a press and tool (C) to install seal assembly (2) in the housing as shown. 3-98