TM 5-3825-226-24
AIR RESERVOIR ASSEMBLY
REMOVE AIR RESERVOIR
ASSEMBLY
WARNING
Open
the
drain
valves
on
the
reservoirs and make sure all air
pressure is removed from the system
before any work is done.
1.
Disconnect hoses (1) through (4) from the front
of the reservoirs. Put identification on hoses for
correct installation.
2.
Disconnect hose (5) from the rear of the
reservoir.
3.
Put OTC Model 1790 Lo-Lift Transmission Jack
(A) in position under the reservoirs. Remove
four bolts (6) from the reservoir bracket.
Remove the reservoir assembly. The weight of
reservoir assembly is 63 lb. (29 kg).
INSTALL AIR RESERVOIR
ASSEMBLY
1.
Put the reservoir assembly on the transmission
jack and lift it in position under tractor.
2.
Install the four bolts to hold the reservoir
assembly and bracket.
3.
Connect hose (1) at the rear of the reservoir.
4.
Connect hoses (4) and (5) to the tanks.
Connect hoses to the fittings (2) and (3).
3-248
