TM 5-3825-226-24
2.
Install front and rear horizontal pins.
3.
Install the washer and nut (4) on the rear
horizontal pin. Tighten the nut with tooling (A)
to a torque of 375 to 425 lb.ft. (510 to 580
N•m).
4.
Put bracket (6) in position and install bolts (7) to
the elevator control valve. Put the control cable
in position and install pin (5) and cotter pin.
5.
Install washer (8) and bolts to the front
horizontal pin. Install: blocks under each side of
the hitch and remove tie hoist.
3-314
