TM 5-3825-226-24
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Q - Quarterly
S - Semiannually
A - Annually
B - Biennially
H - Hours
MI - Miles
Interval
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED OR ADJUSTED AS NEEDED
Item
No
Q
S
A
B
H
MI
Perform All Operator PMCS First
3
ENGINE
NOTE
Oil changes for the engine transmission and hydraulic system will be directed by
AOAP. However, during the warranty period, oil changes shall not exceed the man-
ufacturer's recommended interval. For Army Oil Analysis Program (AOAP), refer to
TB 43-0211.
a. Schedule oil sampling interval in accordance with TB 43-0211, page 7 and lubrication instructions
in TM 5-3825-226-10, page 2-63.
b. Manufacturer's recommended interval is 250 hours or 3 months whichever occurs first. Refer to
TM 5-3825-226-10, page 2-28.
4
TRANSMISSION
a. Schedule oil sampling interval in accordance with TB 43-0211, page 7, and lubrication instructions
in TM 5-3825-226-10, page 2-29.
b. Manufacturer's recommended interval is 500 hours or 3 months, whichever occurs first. Refer to
TM 5-3825-226-10, page 2-38.
5
HYDRAULIC SYSTEM
Schedule oil sampling interval every two months (60 days) or 50 operating hours, whichever occurs
first. When service is requested, perform in accordance with TM 5-3825-226-10, page 2-35.
6
•
BRAKES MASTER CYLINDERS
Check fluid level on tractor and water distributor brake. Master cylinder's fluid level should be at the
bottom of plug openings. Refer to TM 5-3825-226-10, page 2-29.
7
•
BRAKES PADS
Check brake pads on tractor and water distributor for excessive wear. Refer to pages 1-56 and 4-4 of
this manual.
B-34
