TOOL BOX

LANDING GEAR (cont) - TM-5-3825-229-14P_174

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
157

TM 5-3825-229-14&P 4-41. TOOL BOX THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP: Tools Required: Equipment Conditions: Nomenclature: Ref Conditions General Mechanics 4-10 Rear control box removed. Tool Kit Remote control box removed. 4-22 Battery cables disconnected. WARNING Electrical shock hazard exists. Disconnect battery cables (para. 4-22). a. Removal. (1) Remove discharge hose from tool box (para. 2- 19). (2) Remove grommets (1 and 2) from tool box (11) and plate (7). (3) Remove four nuts (4), lockwashers (5) and screws (6). Remove plate (7) from tool box (11). (4) Remove six lock nuts (8), screws (9) and flat washers (10). (5) Remove tool box (11). b. Installation. (1) Install tool box (11) in position on semitrailer. (2) Secure tool box (11) with six flat washers (10), screws (9) and lock nuts (8). Removing and Installing Tool Box. (3) Install plate (7) on side of tool box (4). Secure plate with screws (6), lockwashers (5) and nuts (4). (4) Install grommets (2) in openings in plate (7). Install grommet (1) in slot in tool box (11). (5) Install discharge hose in tool box. 4-83

Privacy Statement
Press Release
Contact