TM 5-3825-229-14&P
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services (cont)
B = Before D = During A = After
ITEM
INTERVAL
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
NO.
B D A
PROCEDURES: CHECK AND HAVE
REPAIRED, FILLED, OR ADJUSTED AS
NEEDED
READY/AVAILABLE IF:
8.
9.
10.
11.
12.
13.
LANDING GEAR
a.
When cranking landing legs, check that
bind. Pull out handcrank and check for high-
speed operation. Push in for low-speed
operation. Make sure opposite side leg
moves equally with side being cranked.
b.
Inspect handcrank, gear box, and landing
leg foot for secure mounting. Check that
handcrank holder stows handcrank securely.
c.
Inspect landing leg gear box for proper
lubrication.
TANK
Inspect tank for obvious damage or leakage.
SUCTION HOSE ASSEMBLY
Inspect suction hoses for signs of scratches,
fraying or wear. Inspect ends of hose
connections for dents in the gasket sealing
surface.
DISCHARGE HOSE ASSEMBLY
Inspect the discharge hose for signs of
chafing, fraying or wear.
FUEL TANK
Inspect the fuel tank and fuel lines for is
damage or leaks. Remove any foreign
material from the fuel tank inlet strainer.
ENGINE COWLING AND SHROUD
Inspect engine cowling and shroud for
obvious damage and loose or missing
hardware.
Landing gear or legs
are inoperative.
Any fuel leakage
evident.
2-13
