TM 5-3895-370-14&P
(h)
Remove screw (30), injection pump
return tube (29), and grommet (31)
from tappet cover (26). Discard
grommet.
(i)
Loosen connector (32) and remove
injection pump return tube (29) from
injection pump (3).
(2)
Installation.
(a)
Install injection pump return tube
(29) to injection pump (3). Tighten
connector (32).
(b)
Install grommet (31), injection pump
return tube (29), and screw (30) on
tappet cover (26). Tighten screw 18
lb-ft (24 Nm).
(c)
Install grommet seal (28) and tee
(15) on injection pump return tube
(29).
(d)
Install grommet seal (27) on tube
(22).
(e)
Install tube (22) on tee (15).
(f)
Install grommet seal (25), tube (22),
and screw (24) on tappet cover (26).
Tighten screw 18 lb-ft (24 Nm).
(g)
Install grommet seal (23) on tube
(22).
(h)
Install adaptor (21), nipple (20), and
hose (19).
4-99