TM 5-3895-370-14&P
(1)
Place suitable container under bleed screw (1) to catch spilling fuel.
(2)
Loosen bleed screw (1).
(3)
Pump lever on lift pump (2) until fuel flowing is free from air.
(4)
Tighten bleed screw (1) 72 lb-in (8 Nm).
NOTE
Bleed injector pump only when injector pump or fuel lines have been replaced.
(5)
Place suitable container under injector pump (3).
(6)
Loosen two bleed screws (4) on injector pump (3).
(7)
Turn on engine switch (para 2-14).
(8)
Repeat step (3) and tighten two bleed screws (4) 72 lb-in (8 Nm).
(9)
Remove suitable container and dispose of fuel in accordance to local regulations.
4-107
