TM 5-3895-370-14&P
4-152. CONTROL CONSOLE REPLACEMENT/REPAIR (CONT).
(3)
Remove two nuts (7), lockwashers (8), screws
(9), and bracket (10) from control console (3).
Discard lockwashers.
(4)
Remove two screws (11) and torch bracket (12)
from mounting bracket (13).
(5)
Remove two nuts (14), screw (15), and torch
handle holder (16).
c.
Cleaning/Inspection.
WARNING
Unsafe welding practices can cause serious injury from fire, explosions, or harmful
agents. Allow only authorized personnel to weld or cut metals, and follow safety
precautions in TC 9-237. Protective clothing and goggles must be worn, adequate
protective equipment used, a suitable fire extinguisher kept nearby, and
requirements of TC 9-237 strictly followed.
(1)
Inspect all welded surfaces for cracks or other damage. Weld damaged areas in accordance with TC 9-237.
(2)
Inspect all other components for obvious signs of damage and replace as necessary.
d.
Assembly.
(1)
Install screw (15), torch handle holder (16), and nut (14).
(2)
Install torch bracket (12) on mounting bracket (13) with two screws (11).
(3)
Install bracket (10) on control console (3) with two nuts (9), lockwashers (8) and nuts (7).
4-430
