TM 5-3895-370-14&P
Table 5-2. DS/GS Preventive Maintenance Checks and Services
Mo = Months
Hr = Hours
Item
Interval
Item to Be
No.
Mo
Hr
Inspected
Procedure
BRAKES
1
6
500
Brakes
Lube fittings on brake spider and camshaft bracket (para 3-1) with
grease (item 22, appendix E). Inspect brake pads and drums for
wear (paras 4-97 and 4-108).
BITUMINOUS
PUMP
SYSTEM
2
.25
75
Bitumen valves
Lube all valves with sealant sticks (item 51, appendix E) (paras 5-56
and 5-57).
3
6
2000
Bituminous
Replace idler bushing and repack packings (para 5-53).
pump
Section III. TROUBLESHOOTING.
5-9. TROUBLESHOOTING INTRODUCTION.
This section contains step-by-step procedures for identifying, locating, and isolating equipment malfunctions.
5-10. TROUBLESHOOTING SYMPTOMS.
The System Symptom Index (Table 5-3) lists the most common malfunctions found during operation of vehicle. Tests or
inspections and corrective actions should be performed in the order listed. This symptom index lists corrective actions
that can be performed by direct and general support maintenance personnel.
5-11. DIRECT AND GENERAL SUPPORT TROUBLESHOOTING PROCEDURES.
The following pages contain the malfunctions listed in the System Symptom Index (Table 5-3), test and inspection
instructions required to determine the malfunction's cause, and corrective actions for repairing the faulty equipment.
Operator and Unit Troubleshooting Procedures (Tables 3-2 and 4-2) should be performed before Direct and General
Support Troubleshooting Procedures.
5-7
