TM 5-3895-370-14&P
(2)
Remove two locknuts (5 and 6) and screws (7
and 8) from main spring (9) and main frame (10).
Discard locknuts.
(3)
With aid of assistant, remove four locknuts (11),
two u-bolts (12), tie plate (4), and main spring (9)
from axle (13). Discard locknuts.
b. Installation.
NOTE
If
installing
both
main
springs,
perform
Step
(1)
and
follow-on
maintenance. Otherwise, perform all
Steps except follow-on maintenance.
(1)
With aid of assistant, install main spring (9) on
axle (13) with two u-bolts (12), tie plate (4), and
four locknuts (11). Tighten nuts 110 to 130 lb-ft
(149-176 Nm).
(2)
Install main spring (9) on main frame (10) with
two screws (8 and 7) and locknuts (6 and 5).
5-155
