TM 5-4320-301-13&P
TM 08936A-13&P/1
CHAPTER 2
OPERATING INSTRUCTIONS
Section I
DESCRIPTION AND USE OF OPERATORS CONTROLS AND INDICATORS
2-1. GENERAL. This section contains descriptions of operator controls and indicators for the FAWPSS
system. Controls and indicators for the 125 GPM Pump are described in TM 5-2805-257-14 and
TM 5-4320-208-12&P for the Model WPSS100 system and in TM 5-4320-309-14 for the Model 9095-91
system.
2-2. SYSTEM CONTROLS AND INDICATORS. This section contains desriptions of operator controls and
indicators for the FAWPSS system. To ensure that the equipment. is ready for operation at all times it must be
inspected (as outlined in Section II of this chapter) before operation, and after operation so that defects maybe
discovered and corrected before they result in serious damage or failure of the system. The necessary
preventive maintenance checks and services will be performed before operati m. Defects discovered during
operation of the system will be noted for future correction, to be made as soon as operation has ceased. Stop
operation immediately if a deficiency is noted during operation which would damage the equipment if operation
were continued. After operation, preventive maintenance checks and services, (PMCS) will be performed at
intervals based on the normal operations of the equipment. Reduce the inten al to compensate for abnormal
conditions. Report defects or unsatisfactory operating characteristics beyond the scope of the operator to
organisational maintenance at the earliest opportunity.
Change 4
2-1