TM 5-4610-288-13
TM 08846A-13/1
2-9.3.9
Loading Stations. Four different types of loading station connection kits are provided, as follows:
. Hose nozzle connection kit; four kits are provided for each system.
. Two-inch hose connection kit; three kits are provided for each system.
l Four-inch hose connection kit; two kits are provided for each system.
. Bag filler connection kit; one kit is provided for each system.
These stations are supplied with water by the output flow side 350 GPM pump connection kit, and are
positioned in series along the output flow side of the system, Assembly and setup instructions are given below:
2-9.3.9.1
Assemble Nozzle Kit
NOTE
Item 26 consists of identical inter-connected hose assys. Simplify assembly by
connecting the hose before performing next step.
a. Connect hose assy (26) to tee assy (17) of the third location standard connection kit.
b. Connect the second hose assy (26) to hose installed in step (a), above.
c. Connect tee assy (17) to the second hose assembly (26).
2-44 Change 2
