TM 5-5430-212-13&P
CHAPTER 1
INTRODUCTION
Section I. General
1-1.
Scope
The scope of this manual covers the information and instructions necessary for the operation and maintenance of
the 4,570 (4,600) gallon capacity tank.
1-2.
Maintenance Forms and Records
Maintenance forms and records that you are required to use are explained in DA Pam 738-750.
1-3.
Destruction of Army Material to Prevent Enemy Use
The tanks may be destroyed by mechanical means, such as cutting the tank from end to end with a sharp
instrument.
1-4.
Administrative Storage
Administrative storage procedures are described in TM-740-90-1.
Section II. Description and Data
1-5.
Description
The tank is used for the storage and transport of potable water (drinking water). The assembled unit shall consist
of the collapsible tank with end fittings, tie-down straps, emergency repair items, hose and tools to secure the tank
safely on the M872 semi-trailer. (See Figs. 1-1 or 1-1A and C-1 or C-1A.)
a.
Collapsible Tank
The tank is constructed of a chlorobutyl liner, a rubber coated multi-ply carcass and an exterior weather and
abrasion resistant tread stock. When laid flat the tank is 39’ long x 7’4" wide x 4" high. When filled it
assumes a pillow-like shape approximately 38’ long x 5’2" wide x 4’6" high.
Access to the tank interior is provided through the use of end clamps which may be removed by qualified
personnel. Handles are provided to facilitate positioning of the tank while empty. When not in use, the tank
may be folded or rolled and stored in the sling and shipping container.
Change 3 1-1
