TM 55-1930-209-14&P-17 2-5  Performance characteristics.  According to factory tests, with only operator onboard and using a 3-bladed, 1 6-inch propeller  with  21-inch  pitch,  boat  has  a  top  speed  of  30  mph  at  a  maximum  attainable  rpm  of  3150.    Boats  are  now equipped  with  3-bladed,  1  6-inch  propellers  with  19-inch  pitch,  and  factory  performance  data  is  not  available  for  this combination.  These boats, at full rpm, have a turning radius of about 90 feet. 2-6  Equipment specifications a. Boat hull Manufacturer MonArk Boat Company CAGEC 07921 Part no. 2308CLF Length overall 26 ft.  0 in.  w/pushknees & outboard protector Draft 1 ft.  3 in.  empty w/outboard drive UP Beam 8 ft.  0 in. Weight 5360 lb b. Engine Manufacturer AB Volvo Penta S-405 08 Gothenburg, Sweden US importer Volvo Penta of America CAGEC 61724 US supplier MonArk Boat Company CAGEC 07921 Type 6-cylinder inline diesel, turbocharger w/aftercooler and heat exchanger.  Engine mounted inboard w/outboard drive Part no. AQAD-40 Horsepower 155 hp at 3600 rpm c. Final drive Manufacturer AB Volvo Penta US importer Volvo Penta of America CAGEC 61724 Type Swingup outboard drive Part no. 290 Reduction 1.61 to 1 Propeller 3-blade, stainless steel, 19-in.  pitch, 16-in. diameter, right-hand rotation d. Depthfinder Manufacturer Aqua Meter Instrument Corp. CAGEC 50819 Type Digital Part no. 550 Accessory Transducer e. Radio, VHF/FM commercial marine band See TM 55-1930-209-14&P-12 for details. 2-7  Items furnished 2-7.1  Components installed as an integral part of the workboat are listed on parts lists in drawings referenced in Appendix A and in Components of End Item List in TM 55-1930-209-14&P-20. 2-7.2        Common    and    bulk    items    for    the    workboat    are    listed    in    Expendable    Supplies    and    Materials    List    in TM 55-1930-209-14&P-20. 2-7.3    Repair  parts  and  special  tools  onboard,  including  those  for  the  workboat,  are  listed  in  Repair  Parts  and  Special Tools List in TM 55-1930-209-14&P-18. 2-8 Items required but not furnished.  All required items are furnished. 2-9 Tools and test equipment.  Use existing tools and equipment onboard the barge.  A complete list of tools and test equipment is in Tools and Test Equipment List in TM 55-1930-209-14&P-18. 2-5