IDENTIFICATION
SYSTEMS OPERATION
IDENTIFICATION
B34445X1
IDENTIFICATION PLATES (Typical)
1. Generator voltage location. 2. Generator group part
number. 3. Sequence number location. 4. Serial No.
Plate. 5. Caterpillar serial number location. 6.
Caterpillar nameplate.
A sequence number (3) is stamped on the upper right
hand side of the generator stator assembly located
between the generator drive adapter face and the
terminal box. This number will be stamped in a position
below the generator voltage (1) and the generator group
part number (2). These are stamped at the time of
manufacture.
Caterpillar Tractor Co. will assign the Caterpillar serial
number at the time of the generator use.
A serial number plate (4) will be attached to the
generator by Caterpillar. This plate will be stamped with
the generator model number. Caterpillar serial number.
and the generator arrangement number.
Below the serial number plate. Caterpillar will stamp the
Caterpillar serial number (5).
A Caterpillar data nameplate (6) is located below the
stamped serial number.
8
