R.F.I./E.M.I. - SUPPRESSOR KIT
In case where R.F.I./E.M.I. levels to BS800 are required an additional suppressor kit is recommended. The connections
are shown below:-
Fig. 22. Main Terminals
ANTI-CONDENSATION HEATERS
It is recommended that anti-condensation heaters are fitted on standby applications, marine applications or where the
machine is standing idle for long periods of time. The most effective anti-condensation heaters are taped directly to the
overhang windings of the stator and as such must be fitted during the winding stage. See Fig. 23. On this basis heaters
must be specified at time of ordering.
Fig. 23
NOTE: For reasons of safety, all
heater leads are terminated in
a separate box located on the
outside of the main terminal
box.
40
