EXPLANATION OF COLUMNS (SECTIONS II AND Ill) (Cont)

EXPLANATION OF COLUMNS (SECTIONS II AND Ill) (Cont) - TM-9-2330-267-14P_207

EXPLANATION OF COLUMNS (SECTIONS II AND Ill) (Cont) - TM-9-2330-267-14P_209

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
194

TM 9-2330-267-14&P F-3. EXPLANATION OF COLUMNS (SECTIONS II AND Ill) (Con’t). (3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows: Code Application/Explanation Z - Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in the 3d position of the SMR code. O - Reparable item. When uneconomically reparable, condemn and dis- pose of the item at unit maintenance or aviation unit level. F - Reparable item. When uneconomically reparable, condemn and dis- pose of the item at the direct support or aviation intermediate level. H - Reparable item. When uneconomically reparable, condemn and dis- pose of the item at the general support level. D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below de- pot level. L - Reparable item. Condemnation and disposal of item not authorized below specialized repair activity (SRA). A - Item requires special handling or condemnation procedures be- cause of specific reasons (e. g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. CAGEC [Column (3)]. The Commercial and Government Entity (CAGE) CODE (C) is a 5-digit alphanumeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. NOTE When you use an NSN to requisition an item, the item you receive may have a different part number from the part ordered. d. PART NUMBER [Column (4)]. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. e. DESCRIPTION AND USABLE ON CODE (UOC) [Column (5)]. This column includes the following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2) Physical security classification. Not Applicable. (3) Items that are included in kits and sets are listed below the name of the kit or set on Figure KIT. (4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry. (5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be manufactured/fabricated. (6) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on the last line(s) of the description (before UOC). (7) The usable on code, when applicable. (See paragraph F-5, Special Information) (8) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for each special tool, special TMDE, and other special support equipment. When density of equipments supported exceeds density spread indicated in the Basis of Issue, the total authorization is increased proportionately. F-4

Privacy Statement
Press Release
Contact