TM 10-4930-220-13&P
1-9. Equipment Data.
a.
Manufacturers
Manufacturer . . . . . . . . . . . . . . . . . . .
Models . . . . . . . . . . . . . . ..........
Manufacturer . . . . . . . . . . . . . . . . . . .
Models . . . . . . . . . . . . . . . .........
Manufacturer . . . . . . . . . . . . . . . . . . .
Model . . . . . . . . . . . . . . . . . ........
b. Nozzle Assembly.
(1) Model Highland TRL2500.
Manufacturer . . . . . . . . . . . . . . . . . . .
Model . . . . . . . . . . . . . . ...........
(2) Other models.
Advance Industries Inc.
TRL 1616 and TRL 1000
Highland lndustries Inc.
TRL 1020,TRL2000, TRL2500
United Manufacturing and Engineering Corp.
TRL4123
Buckeye Division Emco-Wheaton lnc.
5
Manufacturer . . . . . . . . . . . . . . . . . . .
OPW Division, Dover Corp.
Model . . . . . . . . . . . . . . . . .... .... 109GA
c.
Capacities
Tank Capacity . . . . . . . . . . . . . . . . 600 gallons
Cubage . . . . . . . . . . . . . . . . . . . . . . . 131 cu.ft.
d. Weight and Dlmensions.
Length . . . . . . . . . . . . . ............ 56 inches
Width . . . . . . . . . . . . . . . . . . ........ 72 inches
Height . . . . . . . . . . . . . . . ......... 56 inches
Tank weight . . . . . . . . . . . . . . . . . . 390 lbs.
Section III. TECHNICAL PRINCIPLES OF OPERATION
1-10. Storage of Fuel.
a.
The 600 gallon, liquid dispensing tank can be filled with fuel after storage or servicing through the man-
hole on the top of the tank.
b. Fuel can be dispensed from the tank using gravity flow principles by connecting a hose and nozzle to
the emergency dump valve on the bottom end of the tank.
1-11. Dispensing of Fuel.
a.
Fuel can be dispensed from the tank using gravity flow principles by connecting a hose and nozzle to
the emergency dump valve on the bottom end of the tank.
b. Fuel can also be dispensed by using a hand pump coupled to the hand pump port on the top of the tank.
c.
The tank can be drained by opening the drain plug or valve on the bottom of the tank when it is necessary
to drain the contents of the tank.
1-5/(1-6 blank)