TM 5-3825-229-14&P
4-12. CONTROL PANEL SWITCHES AND RELAYS (cont)
g. Engine Relay Panel (cont).
(1)
Removal (cont).
(b)
Remove nut (2), washer (3), and screw (4). Remove clamp (5) and harness (1) from
plate (21).
(c)
Remove four nuts (6), washers (7) and screws (8). Remove relays (9) from plate (21).
(d)
Remove two nuts (1 0), washers (I 1) and screws (1 2) and remove relays (1 3) from plate
(21).
(e)
Remove two nuts (14), washers (15) and screws (16) and remove resistor (17) from
plate (21}.
(f)
Remove four nuts (1 8), washers (1 9) and screws (20) and remove plate (21) from engine
housing.
(2)
Testing.
(a) Testing Glow Plug Resistor.
1.
Test resistor (17) as follows.
2.
Prepare multimeter for ohms measurement per instructions supplied with multimeter.
4-25