TM 10-3835-223-13&P
4-26. HYDRAULIC HOSE MAINTENANCE - cont.
(2)
Assembly.
NOTE
Assembly of one coupler and one nipple is shown. Assembly of other nipple
and coupler is similar.
g.
(a)
Install quick disconnect coupling (10) or nipple (9) on hose fitting (11).
(b)
Install dust covers (12).
(c)
Remove tags.
Installation.
(1)
Remove protective plugs from hydraulic motor (8) ports. Connect replacement hydraulic
hoses (3 and 4) to hydraulic motor (8) as marked.
(2)
Remove protective plugs from hydraulic cylinder (7) ports. Connect replacement
hydraulic hoses (5 and 6) to cylinder (7) as marked.
(4)
Secure hydraulic hoses (3 through 6) to frame weldment (1) with tie-wraps (2). Install
enough tie wraps to keep slack out of hydraulic hoses and prevent chafing against hose
reels.
(5)
Remove tags.
(6)
Service hydraulic reservoir, operate system, and check for leaks.
4-46
