TM 10-3835-223-13&P
4-20. FUEL HOSE MAINTENANCE.
Replacement.
Replacement of the fuel hose consists of requisition of replacement hose.
4-21. GUARD REPLACEMENT.
This task consists of
a. Removal
b. Installation
INITIAL SET-UP:
Tools required:
Tool Kit, General Mechanics, Automotive (Appendix B, Section III, Item 1)
Equipment Condition:
Power Pack removed from frame unit (para. 2-8a.)
a.
Removal.
(1)
Remove four nuts (5), screws (1), lock washers (4), and washers (2 and 3) from cylinder side
guards (6 through (10). Remove guards from frame unit.
(2)
Remove four nuts (15), screws (11), lockwashers (14), and washers (12 and 13) from brake
side guards (16 through (19). Remove guards from frame unit.
b.
Installation.
(1)
Position replacement brake side guards (6 through (10) on frame unit. Aline screw holes
and install four washers (2 and 3), screws (1). lockwashers (4) and nuts (5).
(2)
Position replacement cylinder side guards (16 through (19) on frame unit. Aline screw
holes and install four washers (12 and 13), four screws (11), lockwashers (14), and nuts
(15).
4-32
