TM 10-3835-223-13&P
4-17. VALVE STATION REPLACEMENT - cont.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Connect two hose assemblies (14 and 15) to valve station manifold (12).
Position replacement valve station (19) on power pack frame (13). Make sure valve station
faces the correct direction.
Install four washers (11), lock washers (10), and screws (9).
Connect six hose assemblies (1, 7,8, and 16 through 18) to manifold (12).
Connect electrical connectors (5) to control valves (2, 3, and 6) as marked, then tighten
screws (4).
Remove tags.
Service reservoir with hydraulic fluid.
Start power pack and check for correct operation.
4-27
