TM 10-3835-223-13&P
4-16. SEQUENCE VALVE REPLACEMENT.
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools required:
Tool Kit, General Mechanics, Automotive (Appendix B, Section III, Item 1)
Equipment Condition:
Power pack removed from frame unit (para. 2-8a.)
Power pack guard removed (para. 4-12)
a.
Removal
(1)
Disconnect two hose assemblies (3 and 10) from sequence valve (4).
(2)
Disconnect two hose assemblies (5 and 6) from tee (7).
(3)
Disconnect tee (7) from adapter (8).
(4)
Remove two bolts (1) and washers (2).
(5)
Remove sequence valve (4) from power pack frame (9).
(6)
Remove adapter (8) from sequence valve (4).
b.
Installation.
NOTE
Ensure O-rings are installed on adapter (8) and hose assemblies (3 and 10).
(1)
Install adapter (8) in replacement sequence valve (4).
(2)
Position replacement sequence valve (4) on power pack frame (9).
(3)
Install two washers (2) and bolts (1).
(4)
Connect tee (7) to adapter (8).
(5)
Connect two hose assemblies (6 and 5) to tee (7).
(6)
Connect two hose assemblies (10 and 3) to sequence valve.
(7)
Service hydraulic reservoir and check for leaks.
4-24
