TM 10-4130-237-14
5-5.
CYLINDER HEADS REPLACEMENT (CONT)
Cylinder head bolts are of two different lengths. To prevent damage to en-
gine during reinstallation, note position of different length bolts. Long bolts
are used in exhaust valve area
3
Remove nine cylinder head bolts. Remove cylinder head.
4
Remove all head gasket material from cylinder head and engine.
5
Remove all carbon or foreign material from cylinder head and engine, being careful not to scratch sur-
face.
1
Place new cylinder head gasket on cylinder head assembly.
2
Place new cylinder head assembly on engine.
3
Apply sealing compound (MIL-S-22473) to bolt threads. Install nine cylinder head bolts and hand-
tighten.
5-20