TM 10-4130-237-14
6-2.
CYLINDER BLOCK ASSEMBLY REPAIR/OVERHAUL (CONT)
Solvent may cause toxic fumes. To prevent personal injury, work only in
well-ventilated area. DO NOT breathe fumes for a long time.
Solvent is flammable. To prevent fire or explosion, DO NOT bring open
flame or sparks near solvent.
3
Using solvent, clean cylinders to remove carbon buildup or foreign matter.
4
Using solvent, clean carbon buildup from piston and grooves.
5
Install new piston ring on top ring groove of piston.
6
Check remaining space in groove. If space is 0.007 in. (0.18mm) or greater, remove piston ring and
replace piston.
7
Repeat steps 4 through 6 for left cylinder.
6-10
