TM 10-4320-303-13
4.13.9 Stand Assembly Maintenance.
This task covers:
4.13.9.1 Disassembly
4.13.9.3 Repair
4.13.9.2 Inspection
4.13.9.4 Assembly
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic's,
Nozzles and Elbow Coupler Valves removed
Automotive, Section III, Item 1,
from stand.
Appendix B
General Safety Instructions
Material/Parts
Do not work on equipment without following
Cotter Pins (TM 10-4320-303-23P)
standard shop safety precautions.
4.13.9.1 Disassembly.
Figure 4-22. Stand Assembly Maintenance.
a. Remove three S-hooks (Figure 4-22, 1).
b. Remove three chains (2) from three S-hooks (1).
c. Remove two cotter pins (3) from two straight pins (4). Discard cotter pins (3).
4-55
