TM 10-4320-303-13
b. Install diaphragm (17) in rubber disc (16).
c. Install top disc chamber (15) on rubber disc (16).
d. Install drive shaft (14) in top disc chamber (15).
e. Install rubber roller (13) on drive shaft (14).
f. Install gear plate (11) on drive shaft (14) and insert two screws (12). Tighten screws (12).
g. Install intermediate pinion (10), first intermediate gear (9), and top gear (8) on gear plate (11).
h. Place new gasket (6) and top casing (3) on bottom casing (7).
i. Install six bolts (5) and nuts (4). Tighten nuts (4).
j. Install meter mounting cup (2) on top casing (3).
k. Install two screws (1). Tighten screws (1).
5-19
