TM 10-4320-345-13
2-16. PREPARATION FOR MOVEMENT-cont.
b
Disassemble Storage Assembly Refer to figure 2-31.
NOTES
•
Disassembly of one storage assembly is shown, the other is similar.
•
Refer to para 2-11d to disconnect quick disconnect couplings.
(1) Disconnect 4-inch x 10 feet suction hose (13) from female elbow (14) (inlet) on 20K collapsible tank
(15).
(2) Disconnect four 4-inch x 10 feet suction hoses (10, 11, 12 and 13) from 4-inch gate valve (8).
(3) Disconnect water meter (9) from 4-inch gate valve (8).
(4) Disconnect 4-inch gate valve (8) from adapter (7).
NOTE
Refer to para 2-11e to remove coupling clamps.
(5) Remove coupling clamp (6) and disconnect adapter (7) from reducer tee (1).
(6) Remove coupling clamp (4) and disconnect 6-inch x 500 feet discharge hose (5) from reducer tee (1).
(7) Remove coupling clamp (2) and disconnect reducer tee (1) from 6-inch x 500 feet discharge hose (3).
(8) Drain and prepare 20K collapsible tank (15) for movement. Refer to the applicable TM.
2-72
