TM 10-4610-234-13
4.13
g.
DISCHARGE AND SUCTION HOSE ASSEMBLY MAINTENANCE - continued
NOTE
Ensure gasket is fully seated in groove of coupling/dust cap.
(4) Install gasket (1) in female coupling (2).
(5) Install gasket (13) in dust cap (11).
(6) Connect split ring (10) to male coupling (9). Install dust cap (11) on coupling.
(7) Connect split ring (15) to female coupling (2). Install dust plug (14) on coupling.
Installation. Connect discharge or suction hose assembly to water system (refer to para. 2.10 to con-
nect couplings).
Discharge Hose Assembly
4-14
